Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual

Cabling Information for the SV-4K Media Player

Table 6

describes the cables that ship with the SV-4K hardware.

Table 6. Cables Shipped with the SV-4K Hardware

Cable

Length

Purpose

HDMI-to-HDMI

2 M

(Required) Connects the SV-4K HDMI Out (male) to the HDMI In
(male) port on the TV for digital audio and video support.

RS-232 DE-9
DCE/DTE
Straight Through

2 M

(Required for TV control) Connects the SV-4K serial DTE (male) port
to a serial DCE (female) port on the TV.

IR Extender

2 M

(Required for IR Remote) Connects to the IR port on the SV-4K front
panel to serve as an infrared signal receiver for the SV-4K.

Other Cabling Considerations

It is important for you to assess the ports available on the TVs at the venue so that you
can get any additional adapters or cable types that are needed to connect the SV-4K to
the TV.

Null Modem (Crossover) Cable

The SV-4K is a DTE serial device. Therefore, if the TV also has a DTE (male) serial
port, then you will need to use a null modem (crossover) cable for the TV control
connection.

HDMI-to-DVI Adapter

If the TV does not support HDMI In, then you cannot use the standard HDMI-to-
HDMI cable that ships with the SV-4K. However, if the TV supports a DVI-D
connection, then you can acquire a DVI adapter for the HDMI cable to make the HDMI-
to-DVI connection.

Since this type of connection only supports video, you will also need to connect the SV-
4K audio port to the audio input ports on the TV if audio support is required.

6 of 68