Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual
Configuring Resolution Under Control Panel Display
Specifications
Specifications
The Display Specification for a TV can either be configured for auto-detection of
resolution by the TV, or set to a fixed resolution in the Cisco StadiumVision Director
Control Panel.
resolution by the TV, or set to a fixed resolution in the Cisco StadiumVision Director
Control Panel.
Figure 6. SV-4K and Display Signal Resolution
l
If the resolution is set to auto-detection, then the TV and the SV-4K negotiate the
signal resolution (
signal resolution (
).
l
If a resolution is specified in the Control Panel, then the content is resized
according to that setting. This is the requested SV-4K signal resolution shown in
red in
according to that setting. This is the requested SV-4K signal resolution shown in
red in
.
l
If the signal resolution of the SV-4K is set below 1920x1080 for any reason, the
content will be resized according to the template in use.
content will be resized according to the template in use.
l
The template in use and the corresponding content must match the signal
resolution.
resolution.
To set the resolution for a display, complete the following steps:
1. Go to Control Panel > Setup > Devices > Display Specifications.
2. Select the TV that you want to configure.
22 of 68
© Cisco Systems, Inc. All rights reserved.