Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual

NOTE: For more information and details about DHCP
configuration, see the

available on ciscoet.com to qualified Cisco StadiumVision
partners.

DHCP Configuration Guidelines for the SV-4K Media Player

Consider the following guidelines before configuring a DHCP server for the SV-4K:

Do not configure the Connected Stadium Switch as the IOS DHCP server for
Cisco StadiumVision.

Be sure to set the DHCP server for an infinite lease of IP addresses to the SV-
4K devices.

If you are supporting a deployment with both Cisco DMP 4310G and SV-4K
devices, you will need to configure an Option 43 string for each model.

If the DHCP server is limited to a single Option 43 string per DHCP pool (such as
with a Cisco DHCP server), then be sure to configure a separate DHCP scope for
the SV-4K media players.

Configure the DHCP Option 60, Vendor Class Identifier string:

SV-4K string for North America: "Cisco SV-4K-NA"

SV-4K string for all other regions: "Cisco SV-4K-ROW"

Configure the converted DHCP Option 43, Vendor Specific Option URL:

http://x.x.x.x:8080/StadiumVision/dmp_v4/scripts/boot.brs

where “x.x.x.x” is the IP address of the Cisco StadiumVision Director server.

IMPORTANT: The option 43 string must be converted to TLV
format for compatibility with the SV-4K. For more information,
see

"Appendix: SV-4K and DHCP Option 43" on page 63

Connected Stadium Switch Requirements

This section highlights some of the key requirements to plan your Connected Stadium
switch configuration. However, it does not describe all of the details for you to perform
the configuration. For configuration details, see the

Cisco Connected Stadium Design

Guide

available on ciscoet.com to qualified Cisco StadiumVision partners.

Switch Configuration Requirements for the SV-4K Media Player

Be sure that the Connected Stadium switch meets the following configuration
requirements to support the deployment of the SV-4K media players:

24 of 68