Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual
Deployment Task
For more information see:
Configure firmware settings for auto-registration.
Configure global SV-4K settings.
Power on the SV-4K device.
—
Verify the startup sequence.
Prerequisites for SV-4K Deployment
Before you deploy SV-4K media players, be sure that the following requirements are
met:
met:
l
The pre-deployment tasks are completed. For more information, see
.
l
The SV-4K hardware is not yet powered up.
Provisioning the SV-4K Firmware
Each time the SV-4K device powers on or reboots, a compliance check is done against
the firmware that is loaded on the device against the Cisco StadiumVision Director
auto-registration settings. If the firmware versions do not match, the SV-4K initiates a
firmware upgrade automatically.
the firmware that is loaded on the device against the Cisco StadiumVision Director
auto-registration settings. If the firmware versions do not match, the SV-4K initiates a
firmware upgrade automatically.
Before the SV-4K device can update the firmware, the firmware must be uploaded to
Cisco StadiumVision Director and the auto-registration settings must be configured.
Cisco StadiumVision Director and the auto-registration settings must be configured.
28 of 68
© Cisco Systems, Inc. All rights reserved.