Cisco Cisco StadiumVision Director Maintenance Manual
Table 18. SV-4K Startup Task Sequence
Startup Task
TV Display:
SV-4K obtains IP
address from
DHCP server.
address from
DHCP server.
SV-4K contacts the
Cisco StadiumVision
Director server.
Cisco StadiumVision
Director server.
SV-4K Err LED blinks
for a short period
(normal).
for a short period
(normal).
SV-4K reboots.
IMPORTANT NOTE: During the initial provision process, or after factory
reset, the SV-4K DMP will reboot multiple times before completing the process.
Do not interrupt. This can take several minutes. Do not interrupt.
Firmware upgrade
message
message
(As applicable; Only
after the SV-4K has
been initially deployed)
after the SV-4K has
been initially deployed)
The following message appears if firmware upgrade is needed:
Current system version is out of date. Restart and update!
The device reboots to complete the upgrade process.
The TV repeats display of the screens for obtaining the IP address from
DHCP server and contacting Cisco StadiumVision Director server again
before bypassing the firmware upgrade step.
DHCP server and contacting Cisco StadiumVision Director server again
before bypassing the firmware upgrade step.
42 of 68
© Cisco Systems, Inc. All rights reserved.