Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual

Page of 26
 
 
 
  © 2013 Cisco Systems, Inc. All rights reserved. 
Page 11 of 26 
  When creating custom templates, avoid the following: 
-
  Multiple video regions.  
-
  Overlapping regions (unless you are using overlay). 
-
  Too many regions (causes performance problems). 
Recommended Video Walls (2x3) 
The recommended video wall configuration is 2x3.  Two screens high, and three 
screens wide.  You will use two Full screen templates one for the 2x2 portion and 
one for the 1x2 portion.  This will allow the most options to support the game feed, 
sponsor and team messaging and to supply a compelling fan experience.  You will 
need video wall displays that have “Thin” or “Micro” bezels and that support the tile 
matrix feature.  This will allow you to drive the entire wall with only 2 DMP’s.   
The 2x2 Portion of the Wall 
The first four screens will be driven by one DMP in the upper left and using the tile 
matrix feature you can assigned each screen to a quadrant of the image.  Once 
these are assigned any 1920x1080 video that is played through the DMP will be 
displayed across all four screens as one seamless image.  The game or event feed 
will drop right in and play in this area and any HD video that is 1920x1080 can also 
play here including sponsor commercials, team messaging, etc. 
The 1x2 Portion of the wall 
These screens are set-up the same way with the main DMP in the upper left and 
the displays in tile matrix set to display the appropriate content.  Here the DMP will 
play the video as a full 1920x1080 display but since there is only 2 screens you will 
only be showing one half of a 1920x1080 video.  Create content the normal way but 
only using the left half of the video since the right half will not be displayed.  
  In Pre and Post Game time frames teams use the 2x2 portion of the video wall 
to display sponsor messaging and the 1x2 to display team and venue 
messaging. 
  The In- Game timeframes teams use the 2x2 portion of the video wall to display 
game feed and the 1x2 to display sponsor messaging. 
  Now all screens on the video wall can display full motion video or graphics. 
 
  Teams sell these as a large digital billboard that has high impact.