Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual
© 2011 Cisco Systems, Inc. All rights reserved.
Page 13 of 40
Figure 4.
Updating the MIB
Viewing Recent RS-232 Commands
Send the DMP Commands > Send RS232 command to view the most recently sent
and received RS-232 commands for a DMP. The RS-232 commands and the current
RS-232/Serial configuration are displayed in the Device Details panel under the
Display Actions > Serial Interface tab.
and received RS-232 commands for a DMP. The RS-232 commands and the current
RS-232/Serial configuration are displayed in the Device Details panel under the
Display Actions > Serial Interface tab.
Contact your StadiumVision representative for a list of RS-232 commands for
selected TV models. If you are a Cisco StadiumVision deployment engineer, see the
following link on the StadiumVision Sharepoint site for a listing of RS-232 codes:
selected TV models. If you are a Cisco StadiumVision deployment engineer, see the
following link on the StadiumVision Sharepoint site for a listing of RS-232 codes:
Figure 5.
Send RS232 Command