Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual

Page of 83
 
 
 
© 2011 Cisco Systems, Inc. All rights reserved.   
 
Page 26 of 83 
 
Chapter 3   Implementation 
This chapter provides information about how to implement local TV control in a Cisco 
StadiumVision venue. 
Prerequisites 
The following should be done prior to implementing local TV control and are not 
discussed in this guide.  
Requirement 
For More Information, See 
Cisco StadiumVision headend 
installed/configured 
Video feeds mapped to IP Multicast streams 
from headend 
DMPs and attached TVs installed  
DMPs configured in Cisco StadiumVision 
Director  
IP Multicast streams mapped to local 
channels in Cisco StadiumVision Director 
Channel guide defined in Cisco 
StadiumVision Director 
Templates, event scripts, and additional 
content defined in Cisco StadiumVision 
Director 
Cisco Unified Communications Manager 
installed/configured  (if IP Phone used) 
Implementation Caveats 
Keep the following in mind as you design and implement local TV control.  
  Any designated area requiring local TV control (restaurant, club, bar, back office, 
locker 
room, press box) must be configured as a “Luxury Suite” within Cisco 
StadiumVision Director. 
  When an  IP phone is used for as the local control device for a designated area, 
it is configured using the “IP Phone” tab of the “Luxury Suite” page.  
  When a 3
rd
 
party device is used for local control, it is configured using the “Local 
Control” tab of the “Luxury Suite” page.  
  SVD recognizes an IP phone by its IP address. Hence the phones IP address 
must remain the same. This means the IP address need to be statically