Cisco Cisco RF Gateway 1 Release Notes
12
7020326 Rev A
IP Port Configuration Parameter Settings
IP Port Configuration Parameter Settings
The RF Gateway 1 has four physical GbE input ports that receive video and data
streams from the upstream network. These ports may be used independently (in
software releases 02.02.11 or later) or configured to implement input redundancy.
See Chapter 3, General Configuration and Monitoring of the Cisco RF Gateway 1
Configuration Guide, part number 4025112 for specific details.
streams from the upstream network. These ports may be used independently (in
software releases 02.02.11 or later) or configured to implement input redundancy.
See Chapter 3, General Configuration and Monitoring of the Cisco RF Gateway 1
Configuration Guide, part number 4025112 for specific details.
Displaying IP Port Configuration Settings
Follow these instructions to display the System/IP Network page.
1 Launch your web browser.
2 In the IP Address field, enter the RF Gateway 1 IP address.
3 Click Enter.
4 Click the System/IP Network tab and review the IP settings. See the following
1 Launch your web browser.
2 In the IP Address field, enter the RF Gateway 1 IP address.
3 Click Enter.
4 Click the System/IP Network tab and review the IP settings. See the following
screen.