Cisco Cisco StadiumVision Mobile Maintenance Manual
© 2011-2013 Cisco Systems, Inc. All rights reserved.
Keep the following in mind when creating a custom screen template:
•
There can be only one video region per DMP/TV (always region 1).
•
Regions can be used only for video or graphic content--not both. This is fixed for
each screen template.
•
For Proof of Play, you can have only one region with an ad playlist.
•
For the DMP 4310G, the sum of the regions should not exceed 1920 x 1080,
unless you are using overlay, in which case you could have two regions that are
both 1920 x 1080. For the DMP 4305G, the sum of the regions should not
exceed 1366 x 768 (the DMP 4305G does not support overlaid graphics).
both 1920 x 1080. For the DMP 4305G, the sum of the regions should not
exceed 1366 x 768 (the DMP 4305G does not support overlaid graphics).
•
Up to five regions are supported for each screen layout (e.g., a 5-region screen
layout). A variable number is supported, but more than 5 will cause degradation.
•
When creating custom templates, avoid the following:
-
multiple video regions
-
overlapping regions (unless you are using overlay)
-
too many regions causing performance problems
Creating a Custom Screen Template
1. On the Control Panel, click Setup > Template Editor. The Template Editor
screen displays.
2. Click the “+” above the Screen Templates list.
3. In the Basic Info screen, type a name for the new screen template and specify
the dimensions for width and height. They should correspond to the display
resolution supported on the DMP (1920x1080 or 1366x768).
resolution supported on the DMP (1920x1080 or 1366x768).
Figure 2.
Specifying the Name and Dimensions for a Screen Template