Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual

Page of 28
© 2011 Cisco Systems, Inc. All rights reserved. This document is Cisco Internal Information. 
Page 9 of 28 
4.  Type the desired tag name, for example, the name of the advertising 
agency. The tag name must use the following naming convention in order 
to be picked up by proof of play: 
<tag name>_PoP 
Note: Do not use following invalid characters such as / ? < > \ : * | " in the tag 
name. 
Note: The "_PoP" after the tag name is not included in the proof of play 
report; only the <tag name> is displayed in the report.  
5.  From the Playlist items window, click and drag the content you want to 
assign onto the tag you just created in the Content Navigation window. 
You can assign multiple playlists to the same tag. 
The number of playlists assigned to each tag displays under the # column 
in the Content Navigation window next to the tag name. To find out which 
playlists are assigned to a tag, double-click on the tag name. 
Figure 6. 
Assigning Playlist Content to a PoP Tag 
 
Enabling Proof of Play for an Event Script 
To limit the amount of data gathered by SV Director, proof of play is enabled 
by default for each playlist, but not for event scripts. To generate proof of play 
data, you must enable it at both levels. 
1.  Open the Control Panel and select the Control tab. 
2.  Select an event script. 
3.  Enable the Proof of Play Yes button for the event script. 
4.  Click Run Script