Cisco Cisco StadiumVision Mobile Streamer Quick Setup Guide

You can use different forms of local control only when using HDMI-In encoding to

stream video as a multicast channel. Otherwise, you need to use scripts to

start/stop streaming.

If you want to maintain privacy of channels, create a DMP-encoded channel per

suite with a unique multicast address (from 239.193.20.0/24 range), and create a

separate channel guide per suite.

For example, if you have 10 suites—create 10 separate DMP-encoded channels

with unique multicast addresses, create 10 different channel guides for each

DMP-encoded channel, and assign each suite to a different channel guide.

Prerequisites for Using HDMI-In on the SV-4K

Before you use HDMI-In on the SV-4K, be sure that the following conditions are met:

You have purchased a separate encoder software license. For more information,

see the

Test the devices that you plan to connect to the SV-4K HDMI-In port to stream

content for HDCP support.

Most Mac OS and Windows laptops should work for HDMI-In video encoding for

non-copy-protected content. It is up to the device manufacturer and OS whether or

not this is supported.

When using HDMI-In encoded video channels, be sure that you have configured

the allowable multicast range 239.193.20.0/24 for this feature in the Connected

Stadium network.

139 of 331