Cisco Cisco StadiumVision Mobile Streamer Quick Setup Guide
b. In the Configuration Property box, locate the Zone Based Video Wall
Synchronization property.
c. In the value box, type true.
d. Click Apply.
2. To verify the multicast configuration for zone-based video wall synchronization:
a. From the Management Dashboard, go to SV Director Configuration >
System Configuration > Global DMP Settings > SV-DMP Common
Settings.
b. Verify that the default values for the following properties are compatible with
your network, and change as required:
Content sync multicast address—239.193.0.253
Content sync multicast port—50001
Configuring Groups and Zones for Zone-Based Video Wall
Synchronization for the SV-4K and DMP-2K
User Roles
Administrator / Content Manager
To configure zone-based video wall synchronization for the SV-4K and DMP-2K,
complete the following steps:
complete the following steps:
1. Go to Control Panel > Setup > Zones & Groups> Groups.
2. Create a new group for each media player that is part of the video wall.
3. Add only one SV-4K or DMP-2K location per group.
4. Create a new zone and select the Use as Video Wall checkbox.
5. Add all SV-4K or DMP-2K groups in the video wall to the zone.
1
Synchronization applies only to video and still images. Synchronization cannot be guaranteed for other
content such as tickers, external URLs, or widgets.
198 of 331
© Cisco Systems, Inc. All rights reserved.