Cisco Cisco StadiumVision Mobile Streamer Quick Setup Guide

the return process with the vendor.

SV-4K and DMP-2K Diagnostic URL

Some of the troubleshooting steps for the SV-4K and DMP-2K recommend that you

open a browser and navigate directly to the device using the following URL to further

diagnose a problem:

http://dmp-ip-address

The diagnostic URL requires a password for use. The password is set in the

"defaultDmpAdminPwd" registry key in the Management Dashboard (the same

password as for the Cisco DMP 4310G). The default username is "admin."

Be sure to reset the password from the default value as a security best practice.

CAUTION: Do not manually power off the SV-4K and DMP-2K

after changing the password. To change the SV-4K and DMP-2K

password, you must use the Power Cycle DMP switch command

from the Management Dashboard to restart the device properly.

To use this command, be sure that you have imported the switch

data first.

NOTE: This password is also used for the Diagnostic Web

Server (DWS), and is used by the Cisco DMP 4310G.

Troubleshooting PTP Operation for the SV-4K and DMP-
2K Media Player

This section identifies some of the symptoms related to problems with PTP operation:

318 of 331