Cisco Cisco StadiumVision Mobile Streamer Quick Setup Guide

Locations help you keep track of exactly where a TV and DMP is physically located in

the stadium. For example, if someone tells you that a TV in a restroom at the concourse

100 level is not working, you can refer to the location information to quickly find the TV

and fix it.

NOTE: Be careful not to confuse the civic location on Cisco

Catalyst switches with the DMP Location in Cisco StadiumVision

Director.

Default Zones From Legacy Cisco StadiumVision Director
Releases

NOTE: In older Cisco StadiumVision Director Releases, the

following default zones were provided:

delay_zone

emergency_zone

nonevent_zone

These zones will only appear in your system if you have upgraded

from a release where they were introduced, and if used.

Consider the following guidelines for these default zones:

You need to assign a group to each of the default zones.

Default zones cannot be renamed.

If you want to assign all media players to one of these zones, you should create a

new group, add all media players to that group, and then add that group to the

zone.

Any media players that do not have an action in the emergency/delay state will

have proof of play disrupted in the emergency/delay state.

All TVs assigned to the emergency_zone will display the configured Emergency

message when the Emergency ad hoc state is started by the event operator.

56 of 331