Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual

Page of 94
 
 
© 2011 Cisco Systems, Inc. All rights reserved.   
 
Page 33 of 94 
Figure 33. 
Using an Automatic TV Volume Controller 
 
Network Readiness 
Before you begin: 
1.  Provision the StadiumVision Director Server in its production location. See the 
Cisco StadiumVision Director Server Hardware Installation Guide. 
2.  Install StadiumVision Director on the StadiumVision Director Server. See the 
Cisco StadiumVision Director Installation and Upgrade Guide.  
3.  Configure a DHCP server for your network so that the DMP can obtain an IP 
address. The DHCP Server should be configured to allocate IP address leases 
as indefinite (or permanent). This is required to have the DMP maintain the 
same IP address throughout the preparation process (e.g., through firmware 
upgrade reboots, etc.) as well as afterwards.  
For an IOS-embedded DHCP Server, see below for an example configuration: 
ip dhcp pool sv_homenet 
   import all 
   network 10.50.1.0 255.255.255.0 
   default-router 10.50.1.1 
   dns-server 64.102.6.247 171.68.226.120 
   domain-name cisco.com 
   lease infinite 
As an alternative, you can use the Cisco Network Registrar (CNR). CNR 
provides a feature-rich DHCP and DNS server that can be used in the Cisco 
StadiumVision network. For more information about using CNR with 
StadiumVision, see the Cisco Network Registrar Best Practices Guide for 
StadiumVision