Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual

Page of 94
 
 
© 2011 Cisco Systems, Inc. All rights reserved.   
 
Page 35 of 94 
DMP Auto Registration and Provisioning 
ONLY the Administrator (admin role) for StadiumVision (SV) Director can 
perform the procedures in this guide. 
In StadiumVision release 2.3, DMP 4310Gs can auto discover the SV Director 
server via DHCP and then auto register with SV Director. Once a DMP is registered, 
SV Director automatically executes the necessary commands to provision the DMP 
for operation with StadiumVision. 
This section describes the DMP auto registration and auto provisioning workflows 
for preparing SV Director, the DHCP Server, and the DMP to use the auto 
registration and auto provisioning functionality. It also covers how to view the 
workflow status throughout the auto registration process. 
Note: Auto registration is not supported for the DMP 4305G.  
Note: DMP 4310s must have SE2.2.1 build 1932 or later installed to support auto 
registration. 
Understanding DMP Auto Registration 
Figure 34 illustrates the auto registration process. Although the diagram shows the 
Cisco IOS DHCP Server, you can use any DHCP server that supports the 
configuration of DHCP Options, for example a CNR (Cisco Network Registrar 
server) DHCP server. This document will describe how to set up both Cisco DHCP 
Servers for DHCP options. 
Figure 34. 
Auto Registration Process