Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual
© 2011 Cisco Systems, Inc. All rights reserved.
Page 22 of 76
IR Remote
For IR remotes, placement of the remote is not a consideration. However, if the IR
remote is used, it must have a clear „line of sight‟ to the Cisco DMP. Because the
Cisco DMPs are typically mounted on the back of the TVs in the StadiumVision
solution, it is often difficult to obtain a clear line of sight to the DMP. Therefore, the IR
remote is not generally recommended for local TV control.
remote is used, it must have a clear „line of sight‟ to the Cisco DMP. Because the
Cisco DMPs are typically mounted on the back of the TVs in the StadiumVision
solution, it is often difficult to obtain a clear line of sight to the DMP. Therefore, the IR
remote is not generally recommended for local TV control.
Software Requirements
Each option for local control has different software requirements regarding
interaction with licensed components of StadiumVision.
interaction with licensed components of StadiumVision.
Option
StadiumVision
Director
Control Panel
Director
Control Panel
StadiumVision
Director Video
Management
Services
Director Video
Management
Services
StadiumVision
Director Alternate
Device Services
Director Alternate
Device Services
CUCM
CUAE
Cisco IP Phone
1
Third-party touch
panel
panel
2
IR Remote
For information about the supported/required software levels, see the StadiumVision
Release Note for this release.
Release Note for this release.
1
Requires one license per IP Phone used for local TV control.
2
Requires one license per third-party device used for local TV control.