Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual

Page of 76
 
 
© 2011 Cisco Systems, Inc. All rights reserved.   
 
Page 54 of 76 
 
2.  Click Load to ensure that you are viewing the current settings. 
3.  Scroll through the Registry Data list to the desired parameters. Note: To change 
the phoneControl.stayOnChannelSelect parameter from its default (1), you must 
add the parameter using Add Row.  
4.  Click the Value field beside each parameter and enter the appropriate values. 
5.  Click Apply
For more information about the Registry, see the StadiumVision Director 
Management Dashboard User Guide
Changing the IP Phone Background 
Once an alternative background has been loaded in CUCM (as described in the 
section on 
), you can use 
StadiumVision Director to change the background on the Cisco IP Phone. 
Note: This feature is intended to be used to change the desktop graphic to the 
official StadiumVision graphic. Use caution when changing the desktop graphic to 
any other image as the result may be undesirable. 
1.  On the Advanced Tools page of the Management Dashboard, click Switch 
Phone Desktop Graphic
 
2.  Specify the Scope.  
-  If you select Suite, specify the Ext. Suite ID configured on the Setup > Luxury 
Suite > Commerce Integration tab. If the venue does not use commerce 
integration, use the IP Address parameter to narrow the scope.  
-  If you select IP Address, enter the address if the IP Phone. 
3.  Select the desired image.  
Notes:  
-  StadiumVision supports up to 9 images, even though the CUCM supports 
more.