Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual
© 2011 Cisco Systems, Inc. All rights reserved.
Page 56 of 76
For more information about the Registry, see the StadiumVision Director
Management Dashboard User Guide.
Management Dashboard User Guide.
Labeling TV External Inputs
In a luxury suite, guests can use the Cisco IP Phone to change the TV input to an
external device, such as a DVD player. To make it easier for the guest to select the
input, do the following to
external device, such as a DVD player. To make it easier for the guest to select the
input, do the following to
label the TV‟s external inputs in StadiumVision Director:
1. On the Cisco StadiumVision Control Panel, select Setup.
2. On the Setup page, click Devices > Device Specs.
3. Select the desired device (TV) and click Serial Commands.
4. For each desired input (1 through 4):
a. Select the InputxName command in the available list and click << to add it to
the configured list.
b. Select the InputxName command in the configured list and click + at the upper
right of the Serial Strings of Selected Commands. Enter the desired label, such
as HDMI or Composite. This label that appear on the Cisco IP Phone when the
guest selects the Advanced option.
as HDMI or Composite. This label that appear on the Cisco IP Phone when the
guest selects the Advanced option.
c. Select the Inputx command in the available list and click << to add it to the
configured list.
d. Select the Inputx command in the configured list and click + at the upper right
of the Serial Strings of Selected Commands. Enter the appropriate RS-232
command for that input.
command for that input.
5. If the TV has more available inputs: