Cisco Cisco StadiumVision Mobile Release Notes
© 2011 Cisco Systems, Inc. All rights reserved.
22 of 26
Auto Launch Setting
TV Guide Behavior
Force TV Guide Auto Launch
The TV guide will automatically launch when the channel guide is
displayed on the IP phone regardless of the system registry
setting.
displayed on the IP phone regardless of the system registry
setting.
Disable TV Guide Auto Launch
The TV guide will NOT automatically launch when the channel
guide is displayed on the IP phone regardless of the system
registry setting.
guide is displayed on the IP phone regardless of the system
registry setting.
See the
Improved Zone and Group Management
The Control Panel Setup > Zones and Groups tab was redesigned to highlight the relationship
between TV locations and groups, and between groups and zones. The TV location is a DMP-
independent placeholder that describes the TV’s physical location.
between TV locations and groups, and between groups and zones. The TV location is a DMP-
independent placeholder that describes the TV’s physical location.
Using the redesigned Zones & Groups tab you can easily:
•
View and search on the TV Location Name, IP Address, MAC Address, TV Details and TV
Description, and number of groups to which the TV location is assigned.
Description, and number of groups to which the TV location is assigned.
•
Determine which groups a TV location belongs to, the TV locations for a group, the zones that
the group belongs to, and the groups that are in a zone.
the group belongs to, and the groups that are in a zone.
•
Add and remove multiple TV locations to / from groups.
•
Traverse the zones/groups and TV locations hierarchy. For example, you can view information
top -> down (from Zones to Groups to TV locations) and bottom -> up (from TV locations to
groups to zones).
top -> down (from Zones to Groups to TV locations) and bottom -> up (from TV locations to
groups to zones).
•
Move multiple TV locations between groups (“re-grouping”) and move multiple groups between
zones (“ re-zoning”).
zones (“ re-zoning”).
•
View overlaps such as groups that share the same TV location or zones that share the same
group.
group.
•
Filter DMPs by searching for groups and zones that you want to share the same screen
template.
template.
See the
Management Dashboard Improvements
The Management Dashboard was redesigned as follows:
•
Top level aggregate statuses were added: DMP Health and TV Status. The aggregate status
state depends on sub statuses, removing visual clutter and interpretation of multiple sub status
icons in the device list.
state depends on sub statuses, removing visual clutter and interpretation of multiple sub status
icons in the device list.
•
Warning icons were added for sub statuses within the tabs for each device.
•
The amount of information displayed for a device has been enhanced and removed from the
Device List area.
Device List area.
•
A new TV area within the Status tab was added to display details, with sub status icons, about
the status of the attached display device. Note that to take advantage of this feature, you will
need to add additional RS232 codes to the relevant TV device specs.
the status of the attached display device. Note that to take advantage of this feature, you will
need to add additional RS232 codes to the relevant TV device specs.
•
The Device List columns were re-ordered with the addition of TV power on/off status and MAC
address per DMP. The TV on/off status requires that the TV support RS232 on-demand queries.
address per DMP. The TV on/off status requires that the TV support RS232 on-demand queries.