Cisco Cisco StadiumVision Mobile Release Notes
© 2011 Cisco Systems, Inc. All rights reserved.
29 of 26
Known Issues for StadiumVision Release 2.3
This section summarizes the known issues and resolved defects for StadiumVision Release 2.3.
General
•
Do not use StadiumVision in a live speaker environment. The delay characteristics of MPEG
create either audio/video lip sync issues or delayed audio feedback problems.
create either audio/video lip sync issues or delayed audio feedback problems.
•
When the volume is set to zero via RS-232, the display automatically mutes. If the volume is
adjusted after this, the volume banner will be displayed and indicate a change in value on the
screen, but the display is still muted. It is recommended that the minimum volume string be
something other than zero to prevent this from happening. Known displays to exhibit this
behavior are: Sony Bravia KDL-32S5100, KDL-46S5100 and KDL-52S5100 displays using the
MA2 chassis for RS232 control. It may affect other models which also use the MA2 chassis for
RS232 control.
adjusted after this, the volume banner will be displayed and indicate a change in value on the
screen, but the display is still muted. It is recommended that the minimum volume string be
something other than zero to prevent this from happening. Known displays to exhibit this
behavior are: Sony Bravia KDL-32S5100, KDL-46S5100 and KDL-52S5100 displays using the
MA2 chassis for RS232 control. It may affect other models which also use the MA2 chassis for
RS232 control.
Headend
•
The D9050 has issues with release 4.0.6 and (intermittently) with release 4.0.4, causing it to lose
browser connections with Mozilla, IE and Safari. A cold reboot of the device resolves this http
timeout issue.
browser connections with Mozilla, IE and Safari. A cold reboot of the device resolves this http
timeout issue.
•
The DirecTV COM100 was discontinued and replaced by the COM200. Existing COM100
deployments are supported with SV 2.3
deployments are supported with SV 2.3
•
The Cisco D9050 Encoder does not pass closed captioning data correctly. This issue is under
investigation.
investigation.
•
The Cisco D9858 Transcoder does not pass DirecTV closed captions correctly. This issue is
under investigation.
under investigation.
•
There is an issue with the Cisco D9858 Transcoder and browser compatibility. Use Internet
Explorer for best results. If Safari or Firefox are used, the login may fail and configuration
changes may not be saved.
Explorer for best results. If Safari or Firefox are used, the login may fail and configuration
changes may not be saved.
•
Dual audio is not supported on DMP 4310G. The DMP will only decode the first audio PID. The
second will have to be mapped to a new stream out of the Cisco D9900 DCM while the first
audio PID Is blocked to ensure that the second PID is played correctly on the DMP.
second will have to be mapped to a new stream out of the Cisco D9900 DCM while the first
audio PID Is blocked to ensure that the second PID is played correctly on the DMP.
Video Endpoints (DMPs)
When you upgrade the DMP firmware, you must update the following entries in the Registry.
Otherwise, the DMP will be flagged as “non-compliant” in the Management Dashboard.
Otherwise, the DMP will be flagged as “non-compliant” in the Management Dashboard.
•
Globaldmpsetting.4310.info.init.build
•
Globaldmpsetting.4310.info.init.version
For example, if you upgrade to SE 2.2.1 Build 1932, the registry entries would be the following:
•
Globaldmpsetting.4310.info.init.build = Thu Nov 4 00:27:27 PDT 2010 [b1932]