Cisco Cisco ACNS Software Version 5.5 Quick Setup Guide
21
Configuring Network Settings Using the Installation Wizard
Note
You must have a PC workstation running the Windows 95/98, Windows 2000, or Windows NT operating
system on the same subnet as your Content Distribution Manager, Content Engines, and Content Routers in
order for the Installation Wizard to work properly.
system on the same subnet as your Content Distribution Manager, Content Engines, and Content Routers in
order for the Installation Wizard to work properly.
To configure network settings using the Installation Wizard that is part of the E-CDN application, follow these steps:
Step 1
Insert the Installation Wizard CD-ROM into the CD-ROM drive on your workstation.
Step 2
Locate the setup.exe file and double-click it.
Step 3
After the Installation Wizard is automatically installed, go to C:/Program Files/Cisco Systems/CDN Wizard/cdnwiz.exe.
Double-click the cndwiz.exe file to launch the Installation Wizard. The Cisco Content Delivery Network Installation
Wizard screen appears.
Double-click the cndwiz.exe file to launch the Installation Wizard. The Cisco Content Delivery Network Installation
Wizard screen appears.
Step 4
Click Next to advance to the Select a Device screen, which lists all Enterprise CDN devices on the subnet by their device
ID or by a user-friendly name previously assigned using the Installation Wizard.
ID or by a user-friendly name previously assigned using the Installation Wizard.
Note
The Installation Wizard shows only the devices that are connected to the same local segment as the
Windows PC that is running the Installation Wizard program.
Windows PC that is running the Installation Wizard program.
Step 5
Choose the first device that you want to configure and click Next to advance to the Name screen.
Tip
If you cannot determine by the MAC address which device to configure, choose a device and click Details to
display the Device Details screen.
display the Device Details screen.
You can also sort devices by right-clicking in the area where the devices are listed and choosing one of the sort
options from the shortcut menu that appears. You can sort devices by device name (Sort by Device), status,
type, version, or IP address.
options from the shortcut menu that appears. You can sort devices by device name (Sort by Device), status,
type, version, or IP address.
Step 6
If you have not already done so, enter a user-friendly name in the field provided.
This name supplements the alphanumeric device ID or MAC address and makes it easier to identify the device when
you use the Installation Wizard or Content Distribution Manager GUI.
you use the Installation Wizard or Content Distribution Manager GUI.
Step 7
Click Next to advance to the Obtain Network Settings Automatically (DHCP) screen.
Step 8
Indicate whether or not you are using a DHCP server:
•
If you are using DHCP, choose Yes.
Note
If you are configuring the Content Distribution Manager and want to use DHCP, you must have DHCP
configured to statically assign an IP address to the Content Distribution Manager. That is, even with
DHCP, the IP address of the Content Distribution Manager cannot be a different IP address assigned
by DHCP between reboots.
configured to statically assign an IP address to the Content Distribution Manager. That is, even with
DHCP, the IP address of the Content Distribution Manager cannot be a different IP address assigned
by DHCP between reboots.
•
If you are not using DHCP and are configuring E-CDN devices manually, choose No and then click Next. The
Network Settings screen appears.
Network Settings screen appears.
–
Place your cursor in the IP address field and enter the network IP address, using the arrow key to move from
block to block.
block to block.
–
Press the Tab key to advance to the following fields and enter the subnet mask, as well as the gateway address
used by the selected device.
used by the selected device.