Cisco Cisco ACNS Software Version 5.5 Troubleshooting Guide
Determining WCCP Support for Cisco IOS and
Content Engine Software
Content Engine Software
Document ID: 15065
Contents
Introduction
Before You Begin
Conventions
Prerequisites
Components Used
WCCP Support for Cisco IOS Software
WCCP Support for Cisco Cache Engine Software
Related Information
Before You Begin
Conventions
Prerequisites
Components Used
WCCP Support for Cisco IOS Software
WCCP Support for Cisco Cache Engine Software
Related Information
Introduction
The document provides Web Cache Communication Protocol (WCCP) support for Cisco IOS® software and
Cisco Content Engine software. WCCP is implemented within software−switching paths of all supported
platforms shown in the table below. WCCP is available for process−, fast−, and Cisco Express Forward−
(CEF−) based forwarding paths.
Cisco Content Engine software. WCCP is implemented within software−switching paths of all supported
platforms shown in the table below. WCCP is available for process−, fast−, and Cisco Express Forward−
(CEF−) based forwarding paths.
WCCP, developed by Cisco, specifies interactions between one or more routers (or Layer 3 switches), and one
or more Web caches. The interaction establishes and maintains the transparent redirection of selected types of
traffic flowing through a group of routers. The selected traffic is redirected to a group of Web caches with the
aim of optimizing resource usage and lowering response times.
or more Web caches. The interaction establishes and maintains the transparent redirection of selected types of
traffic flowing through a group of routers. The selected traffic is redirected to a group of Web caches with the
aim of optimizing resource usage and lowering response times.
Before You Begin
Conventions
For more information on document conventions, see the Cisco Technical Tips Conventions.
Prerequisites
There are no specific prerequisites for this document.
Components Used
This document is not restricted to specific software and hardware versions.
The information presented in this document was created from devices in a specific lab environment. All
devices used in this document started with a cleared (default) configuration. If you are working in a live
network, ensure that you understand the potential impact of any command before using it.
devices used in this document started with a cleared (default) configuration. If you are working in a live
network, ensure that you understand the potential impact of any command before using it.
WCCP Support for Cisco IOS Software
You can verify the platform and Cisco IOS software release on a router for the respective WCCP version
(Version 1 (v1) or Version 2 (v2) ) by using the Cisco IOS Feature Navigator (registered customers only) tool.
(Version 1 (v1) or Version 2 (v2) ) by using the Cisco IOS Feature Navigator (registered customers only) tool.