Cisco Model D9479 Gigabit QAM Modulator Installation Guide
Appendix A
Verify the Install Package Exists on the DNCS
30
78-4024239-01 Rev B
Check for the Install Tool on the DNCS
Important: If you are using SR 2.7/3.7/4.2, this procedure is not required because
the install tool (install_pkg) is pre-packaged within the software.
Checking for install_pkg on the DNCS
1 From an xterm window, type cd /usr/sbin and press Enter.
2 Type ls and press Enter.
3 Is the install_pkg file present on the DNCS?
2 Type ls and press Enter.
3 Is the install_pkg file present on the DNCS?
If yes, resume your installation procedures.
If no, go to step 4.
4 Log on to Cisco’s FTP server.
Notes:
The address of the server is ftp.sciatl.com or 192.133.243.133.
Note: The address for the Cisco FTP server is subject to change. If you are
Note: The address for the Cisco FTP server is subject to change. If you are
unable to reach the FTP server, please contact Cisco Services for the latest
address.
The username is anonymous.
The password is the email address of the person logging in.
5 Choose one of the following options to navigate to the directory in which the file
is located:
If you are inside the firewall, type
cd /external_pub/scicare/RELEASED/SR2.2Patches.
If you are outside the firewall, type
cd /pub/scicare/RELEASED/SR2.2Patches.
6 Type bin and press Enter. The system sets the ftp transfer mode to binary.
7 Type hash and press Enter. The system configures itself to display hash marks
7 Type hash and press Enter. The system configures itself to display hash marks
that show file-transfer progress.
8 Type get install_pkg and press Enter. The system begins copying files into the
/export/home/dncs/download/directory on your DNCS.
9 Type get install_pkg README_3.0.1.3p2EP1.txt. The system begins copying
files into the /export/home/dncs/download/directory on your DNCS.
10 Type bye and press Enter to log out of Cisco 's FTP server.
11 Continue with the installation procedures.
11 Continue with the installation procedures.