Cisco Cisco 1 GHz GainStar Amplifier Data Sheet
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 6
Data Sheet
Cisco 1 GHz GainStar Line Extender with 85/105
MHz Split
MHz Split
The Cisco
®
1 GHz GainStar Line Extender (GSLE) is specifically designed for use in
hybrid fiber-coaxial (HFC) networks. It provides excellent forward and reverse path
performance combined with high reliability and a user-friendly layout. All new Cisco
GainStar products share common plug-in accessories and perform to 1 GHz in the
forward path. The Cisco 1 GHz GSLE provides a single high-level output port or two
lower-level RF output ports in a strand-mount configuration (Figure 1 and Figure 2).
performance combined with high reliability and a user-friendly layout. All new Cisco
GainStar products share common plug-in accessories and perform to 1 GHz in the
forward path. The Cisco 1 GHz GSLE provides a single high-level output port or two
lower-level RF output ports in a strand-mount configuration (Figure 1 and Figure 2).
The Cisco 1 GHz GSLE uses GaAsFET technology optimized for superior distortion performance.
Features
●
1-GHz performance
●
Selectable single or dual outputs with an onboard signal director
●
Standard plug-in attenuators that are used to adjust gain and equalization settings
●
Surge-resistant circuitry that helps ensure resistance to high voltage transients (6 kV)
●
Thermal RF control that reduces gain movement over temperature
●
10A current capacity (steady state) and 15A surge survivability
●
Outdoor housing that is IP68 dustproof and watertight
●
Strand-mount housing configurations available
●
●
RoHS 6 of 6
Figure 1. Cisco 1 GHz GainStar Line Extender