Cisco Cisco Prime Collaboration Manager 1.2 Installation Guide
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Video SLA Assessment Agent 3.1
Installation Guide
Installation Guide
This guide is for Cisco Prime Collaboration Manager (Prime CM) 1.2 users.
Overview of VSA Agent
Prime CM uses VSA Agent to assess a network’s readiness to deploy or upgrade Cisco TelePresence
systems. VSA Agent provides network path characteristics, such as latency, jitter, and packet loss
measurements, prior to deployment. By automating the assessment process, VSA Agent accelerates and
simplifies deployment. We recommend that you review “Proactively Troubleshooting the Network” in
the
systems. VSA Agent provides network path characteristics, such as latency, jitter, and packet loss
measurements, prior to deployment. By automating the assessment process, VSA Agent accelerates and
simplifies deployment. We recommend that you review “Proactively Troubleshooting the Network” in
the
VSA Agent tests are run between two systems: source and destination. These systems must reside on the
same topology as the source and destination video feeds (the Cisco TelePresence System). VSA Agent
must be deployed at both the source and destination systems (see
same topology as the source and destination video feeds (the Cisco TelePresence System). VSA Agent
must be deployed at both the source and destination systems (see
for the deployment topology).
Figure 1
VSA Agent Deployment Topology