Cisco Cisco Explorer Set-top Software Version 2.1 User Guide
Post and Boot Results Diagnostic Screen
749244 Rev G
21
Boot Status
The Explorer DHCT must access information from various sources in order to boot.
The Explorer DHCT must access information from various sources in order to boot.
The Boot Status section includes the results of the DHCT's attempt to access the
sources that the DHCT must receive in order to boot. These results are updated in
the order shown as the DHCT boots up. The indicators within this screen are
updated as the DHCT moves through the possible states; however, they are never
updated in reverse because this information only indicates the status during boot up.
Field
Name
Description
Possible Values
UNcfg
The boot process for the
User-to-Network configuration
(UNcfg)
User-to-Network configuration
(UNcfg)
Broadcast—Global broadcast
message received
message received
Ready—An individually addressed
configuration message received
configuration message received
Searching—No UNCfg message
received
received
BFS
The boot process for the
Broadcast File System (BFS)
Broadcast File System (BFS)
Ready—BFS directory has been
found and loaded
found and loaded
Searching—Looking for the BFS
directory
directory
SI
The boot process for the System
Information (SI)
Information (SI)
Ready—SI tables are loaded
Searching—SI tables are not
loaded
loaded
SAM
The boot process for the Service
Application Manager (SAM)
Application Manager (SAM)
Ready QAM—SAM has completed
loading inband data
loading inband data
Ready QPSK—SAM has
completed loading out-of-band
data
completed loading out-of-band
data
Trying QAM—SAM is attempting
to load data inband
to load data inband
Trying QPSK—SAM is attempting
to load data out-of-band
to load data out-of-band
Waiting—SAM is waiting for other
required boot operations to finish
before attempting to load its tables
required boot operations to finish
before attempting to load its tables