Cisco Prisma II 1310 nm HDTx Transmitters Installation Guide
Chapter 4 Operation using LCI
94
Checking the Operating Status
To Check Operating Status using LCI
Using the LCI, you can check the status of all module operating parameters.
1 In the module tree, right-click the module, and then click Details.
1 In the module tree, right-click the module, and then click Details.
The Module Details window appears as shown in the following example. The
monitored parameters are displayed under Parameters and Status.
monitored parameters are displayed under Parameters and Status.
2 Check the operating parameters.
Note:
The Communication Status parameter is reported by the LCI to indicate
communication status with the module. For help with any problems indicated
here, see Troubleshooting Alarm Conditions (on page 104).
communication status with the module. For help with any problems indicated
here, see Troubleshooting Alarm Conditions (on page 104).
For details on all operating status parameters, see Module Parameter
Descriptions (on page 109).
Descriptions (on page 109).