Cisco Cisco Prisma II ICIM 2 Installation Guide
EDR Transmitter Front and Back Panel
OL-32414-01
13
At the node or Prisma II chassis, the reverse transmitter converts one or more RF
signal(s) to an optical signal using an installed OPM, and transmits the signal to the
headend or hub via fiber optic cable.
signal(s) to an optical signal using an installed OPM, and transmits the signal to the
headend or hub via fiber optic cable.
When this optical signal reaches the headend or hub, the reverse optical receiver
converts the signal to an RF signal and then routes the signal to the receiver's RF
output using its installed OPM.
converts the signal to an RF signal and then routes the signal to the receiver's RF
output using its installed OPM.
Laser Warning
WARNING:
Avoid damage to your eyes! Do not look into any optical connector while the
system is active. Even if the unit is off, there may still be hazardous optical
levels present.
system is active. Even if the unit is off, there may still be hazardous optical
levels present.