Cisco Prisma II 1310 nm HDTx Transmitters Installation Guide
Connecting the ICIM to Multiple Prisma II Chassis
Installation Instructions
Installation Instructions
Overview
Audience
These installation instructions are intended for all cable system operators or
installers of the Prisma II™ Chassis using the ICIM or Transmission Network
Control System (TNCS) software.
installers of the Prisma II™ Chassis using the ICIM or Transmission Network
Control System (TNCS) software.
Introduction
The Prisma II Chassis transports communication and control signals from the
application modules to the ICIM, LCI interface, or TNCS software. These installation
instructions are intended as a quick guide to the connecting these components.
application modules to the ICIM, LCI interface, or TNCS software. These installation
instructions are intended as a quick guide to the connecting these components.
ICIM Location
If an ICIM is installed in the Prisma II Chassis, it must be installed in slots 15/16.
Additional Information
For additional information, refer to the guide that was shipped with the chassis,
Prisma II Chassis Installation and Operation Guide, part number 713375.
Prisma II Chassis Installation and Operation Guide, part number 713375.