Cisco Cisco Prisma II EDR Receiver Installation Guide
78-713378-01 Rev C
Operation Using LCI
4-29
Modifying Reverse Receiver Alarm Limits,
Continued
2.
Double-click the limit you want to change.
Result: The Change Value dialog box displays. The graphic below shows the
Result: The Change Value dialog box displays. The graphic below shows the
dialog box for the minor low limit of the Rx 1 Optical Input Power parameter.
3.
In the Command to box, type the value to use for the limit.
4.
Click Execute.
Result: The new value displays in the alarm limit column.
Result: The new value displays in the alarm limit column.