Cisco Cisco Prisma II ICIM 2 Installation Guide
78-748705-01 Rev C
Operation Using LCI
4-7
Obtain and Install the Prisma II Driver Upgrade
Introduction
A Prisma II driver upgrade is needed to operate the processor using LCI software
version 1.4.3.
Important: This upgrade is not required to operate the processor if you are using an
Important: This upgrade is not required to operate the processor if you are using an
ICIM or any LCI software later than 1.4.3.
Required Software
To operate the processor using LCI, you must have (in addition to Windows) the
following Cisco software installed on your PC.
•
•
LCI software, version 1.4.3 or later
•
Prisma II driver upgrade (if using LCI version 1.4.3)
Important: If you are using LCI software version 1.4.3, it must be installed on your
PC prior to installing the driver upgrade. LCI software version 1.4.3 was shipped on
CD-ROM with the 56-connector chassis and is also available on the Web site:
http://www.scientificatlanta.com/tncs/upgrades/upgrades.htm.
Obtaining the Driver Upgrade
Internet access is required in order to obtain this software. To obtain the driver
upgrade, you must download it from the Web site. The address is:
http://www.scientificatlanta.com/tncs/upgrades/upgrades.htm
Downloads may be made to any computer but must ultimately be installed on the
http://www.scientificatlanta.com/tncs/upgrades/upgrades.htm
Downloads may be made to any computer but must ultimately be installed on the
PC running the LCI software.
Downloading and Installing the Driver Upgrade (LCI Software Version 1.4.3 ONLY)
Follow these steps to install the upgrade.
1.
Ensure that LCI software version 1.4.3 is installed on your system. If it is not,
refer to Install LCI earlier in this chapter for instructions.
2.
Access the Web site shown above.
3.
Click the Prisma II Driver Upgrade link.
4.
At the prompt, save the file to a location of your choice on your system.
5.
In Windows Explorer, double-click the saved file.
6.
Follow the prompts of the installation program. The driver upgrade is
installed in the proper location on your system. The LCI software is now
ready to use with the processor.