Cisco Cisco Prisma II EDR Receiver Installation Guide

4-12 

Operation Using LCI 

78-748705-01 Rev C 

Information about a device (its parameters, alarms, and status) is located in the 

Device Details window.  The graphic below shows the Device Details window for a 

Prisma II bdr Dual Transmit Processor. 

 

Within the LCI device tree, you can access this window using one of the following 

four methods: 
• 

Double-click the chassis and select the device in the graphic that displays 

• 

Right-click the chassis and select Open from the menu that displays 

• 

Double-click the module 

• 

Right-click the device and select Details from the menu that displays 

Note:  Although you can use the method that is most convenient for you, the 

procedures throughout this chapter are described using the right-click device 

technique.   
For more information about the device tree, refer to LCI Device Tree Overview 

earlier in this chapter.