Cisco Cisco Prisma II EDR Receiver Installation Guide
78-748705-01 Rev C
Operation Using the ICIM
3-7
ICIM Password,
Continued
Accessing the Password Function
The Password menu allows you to create, enter, change, or disable the user
password. It also allows service personnel to use the Cisco (SA) password.
Follow these steps to access the Password menu.
Follow these steps to access the Password menu.
1.
Press the
ICIM
key.
2.
Use the
key to scroll down until Password is highlighted.
3.
Press the
SEL
key.
Results:
•
•
The Password menu is displayed.
•
User Psw is highlighted.
Expired Password or Inactive Password Messages
The entry of a valid user or SA password allows changes to system parameters for a
period of 10 minutes. If more than 10 minutes have passed since your last keystroke,
and you attempt to make any changes to system parameters, the menu displays Psw
Expired. If, after more than 10 minutes you attempt to disable the password, the
menu displays Failed, Password Not Active.
If either of these messages is displayed, you are required to re-enter the password.
If either of these messages is displayed, you are required to re-enter the password.
To re-enter the password, follow the procedure in Re-Entering a User Password
later in this section.