Cisco Cisco Prisma II EDR Receiver Installation Guide
78-748705-01 Rev C
Installation
2-13
Install Optical Transmitters in the Processor
Introduction
For best results, install the processor in the chassis before installing the optical
transmitter in the processor.
Installing the Optical Transmitter
Follow these steps to install the optical transmitter in the processor.
1.
Align the ridges on the top and bottom of the optical transmitter with the
guide slots located on the processor.
2.
Gently slide the optical transmitter into the processor until you feel the power
and communications connections on the back of the module join connectors
on the processor. Use the thumbscrew on the top of the optical transmitter to
lock it in place.