Cisco Cisco Prime Network Services Controller 3.0
© 2013, 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 79 of 169
SUMMARY STEPS
1. (Optional) connect {policy-mgr | resource-mgr | service-reg | vm-mgr}
Note Step 1 is optional. You can also perform the acknowledge fault command in the management
controller CLI. Each CLI allows you to control a different set of logs.
controller CLI. Each CLI allows you to control a different set of logs.
2. scope monitoring
3. acknowledge fault <fault-id>
4. commit-buffer
EXAMPLES
This example shows how to acknowledge a fault in the management controller CLI:
nsc# scope monitoring
nsc /monitoring # acknowledge fault 10194
nsc /monitoring* # commit-buffer
nsc /monitoring #
Displaying Audit Logs
You can display a list of audit logs.
BEFORE YOU BEGIN
Services Controller CLI.
CLI
Management controller
Policy manager
Resource manager
Service registry
Virtual machine manager
SUMMARY STEPS
1. (Optional) connect {policy-mgr | resource-mgr | service-reg | vm-mgr}
Note Step 1 is optional. You can also perform the show audit-logs
command in the management controller CLI. Each CLI allows you to control a different set of logs.
2. scope monitoring
3. show audit-logs
EXAMPLES
This example shows how to display a list of audit logs in the management controller CLI:
nsc# scope monitoring
nsc /monitoring # show audit-logs
Audit trail logs:
Creation Time User ID Action Description
-------------------- ---------- -------- ------------- -----------------
2010-11-29 T14:56:29.195 admin 10615 Modification sysdebug mgmt log
control module
2010-11-29 T14:56:29.195 admin 10616 Modification sysdebug mgmt log