Cisco Cisco Videoscape Voyager Vantage 3.0 User Guide
105
Cisco Systems, Inc.
www.cisco.com
Card Diagnostics
Introduction
The Card diagnostic screen displays CableCARD information followed by any additional information provided by the
CableCARD manufacturer. The host displays its own CableCARD summary information on the first summary screen. The
host then pulls any subsequent CableCARD diagnostic screens from the CableCARD module and displays them for your
information.
CableCARD manufacturer. The host displays its own CableCARD summary information on the first summary screen. The
host then pulls any subsequent CableCARD diagnostic screens from the CableCARD module and displays them for your
information.
Note:
The content of screens other than the summary screen are dependent on the CableCARD manufacturer and so are
not included in this document.
not included in this document.
If you are using Cisco M-Cards for your CableCARD modules, you can get detailed information on these screens
from M-Card and S-Card Diagnostic Screens on a TV Host: A Reference Guide.
from M-Card and S-Card Diagnostic Screens on a TV Host: A Reference Guide.
Navigation
For instructions on navigating diagnostic screens, see
.
Summary Screen
Tasks that you can perform from the Summary screen include the following:
Determine the CableCARD OOB mode
Determine the copy protection provisioning status
View the CableCARD, host, and manufacturer IDs
View the CableCARD MAC address, serial number, and software and hardware versions