Cisco Cisco Videoscape Voyager Vantage 3.0 User Guide

Page of 204
57
   
Manufacturer Diagnostics
Host DAVIC Status Screen
Table 5
Host DAVIC Status Screen 
Field Name
Description
Possible Values
FDC
Shows levels in reference to the Forward Data Channel as described below.
RDC
Shows levels in reference to the Reverse Data Channel as described below.
Frequency
The frequency (Freq) of the tuned 
QPSK receiver.
[Network dependent]
FDC Range: 70–130 MHz
RDC Range: 8 to 26.5 MHz
Status
The status of the receiver in regards 
to receiving valid data.
Locked — Receiver locked onto a 
frequency with valid QPSK data
Unlocked — Receiver not locked 
onto a frequency with valid QPSK 
data
Level
The approximate received signal level 
in dBmV.
Refer to hardware specifications.
Value displayed in white — Signal 
level nominal
Value displayed in amber — 
Signal level marginally too high or 
too low
Value displayed in red — Signal 
level unacceptably too high or 
too low
Data Rate
Current data rate (in Kbps) of the 
FDC/RDC.
[Integer > 0]
S/N
The signal-to-noise ratio in dB.
Refer to hardware specifications.
Value displayed in white — Signal 
level nominal
Value displayed in amber — 
Signal level marginally too high or 
too low
Value displayed in red — Signal 
level unacceptably too high or 
too low
n/a — Not applicable for this 
DHCT
Corr Bytes
The number of corrected bytes sent 
or received.
[Integer > 0]
Un Cor Bytes
The number of uncorrected bytes 
sent or received.
[Integer > 0]
Seconds
The number of seconds that the 
frequency has been locked.
[Integer > 0]
Total Bytes
The total number of data bytes 
successfully read since the frequency 
was locked.
[Integer > 0]