Cisco Cisco Videoscape Voyager Vantage 3.3 User Guide
40
Summary Information Diagnostics
Pages 1-4: Summary Information
Table 1
Summary Screen - Pages 1-4
Field Name
Description
Possible Values
Firmware Version, Date
The version of the set-top firmware
and its date of installation.
and its date of installation.
[Device dependent]
Example:
3.0.6.118 Fri Apr 8 2011,
7:41:54 PM GMT
CP Status
The current status of the
CableCARD/host authentication
(binding).
CableCARD/host authentication
(binding).
Ready — Authorization has been
received from the headend by
the card/Host pair and the
authentication and binding are
complete
received from the headend by
the card/Host pair and the
authentication and binding are
complete
Not Ready — Waiting for
authorization, or authorization
failed
authorization, or authorization
failed
n/a — Failure or no CableCARD
module detected
module detected
CA Status
Status of the conditional access for
the set-top.
the set-top.
Ready
Not Staged
Not Initialized
Not Authorized
CA Comm Error
Channel Error
Other CA Error
CA Unknown Error
InBand Network
Tuner-1 — Tuner-8
Displays the Frequency, Modulation,
Power levels, SNR (signal-to-noise
ratio), and whether the carrier is
locked for all tuners.
Power levels, SNR (signal-to-noise
ratio), and whether the carrier is
locked for all tuners.
Note:
If Tuner-n is disabled, the
screen displays n/a for all Tuner-n
fields.
fields.
[Tuner-dependent values]
Frequency (MHz)
The frequency (freq) in which each
in-band tuner is tuned (MHz).
in-band tuner is tuned (MHz).
[Dependent upon setting]
Modulation
The current QAM modulation mode of
each in-band tuner.
each in-band tuner.
[QAM-dependent]
Example:
QAM-64
QAM-256
Analog
Other