Cisco Cisco Videoscape Voyager Vantage 3.3

 

6 

OL-26411-02 

Complete the following steps to create a SAM service for the package you created. 

Note: Multiple SAM services can be associated with one entitlement package. 
1  From the DNCS Administrative Console, select the Application Interface 

Modules tab. 

2  Click the SAM Service button. The SAM Service List window opens. 
3  Click File > New. The Set Up SAM Service window opens. 
4  Configure the SAM Service variables per the guidelines below. 



 

Service Name (required) - This name is only available and shown to users of 
the DNCS who have access to the SAM Services List.  Make this descriptive 
enough to understand which service is being offered.  End users will not see 
this field. 



 

Short Description (required) - The short description must match one of the 
values defined in this document; the Vantage UI will use these short 
description values to determine if those services are being provisioned.  

The following short description names are reserved for provisioning services.  Each 
of these short descriptions must only be used once per system and must be used 
exactly as shown. 

 

Service Type 

SAM Short Description 

Brick package 

_BASE 

MR-DVR 

_MRDV 

Note: Before you set up a SAM Service for MR-DVR, 
refer to the Multi-Room DVR chapter for an overview 
of the end-to-end process required to support the MR-
DVR feature. 

Remote DVR 

_RDVR 

DVR 

_SADV 

Switched Digital Video (SDV)  _SASD 

Downloadable objects 

_<downloadable package ID> 

Note: See the Configuring Downloadable Objects for 
Cisco Videoscape Voyager Vantage (part number OL-
26414) document for details.