Cisco Cisco Videoscape Voyager Vantage 3.0 Installation Guide
Chapter 2 Phase One - Perform Pre-Upgrade Checks
20
OL-26412-01
Obtain Software
There are two ways you can obtain our client application software:
You can choose to order a software binder. Software binders are available for
released software and include CDs and release notes. Contact Cisco Services for
more information on receiving a software binder.
released software and include CDs and release notes. Contact Cisco Services for
more information on receiving a software binder.
You can download the software by connecting to an FTP server maintained by
Cisco Services. BETA software, emergency patches, and released software are
available through the FTP server.
Cisco Services. BETA software, emergency patches, and released software are
available through the FTP server.
The remainder of this section provides an outline for obtaining the software through
the FTP server. If you have received a software binder, go to Installing the Software
from a CD (on page 23) for instructions to load the software from a CD.
the FTP server. If you have received a software binder, go to Installing the Software
from a CD (on page 23) for instructions to load the software from a CD.
Download Software from the FTP Server
Access to the FTP server requires current FTP server site access information. This
information is located in the software release note.
Important: BETA software is provided to labs which, in turn, provide a broader
testing environment. BETA software releases are provided in their current state of
development and are not covered under the same software license agreements as
released software. BETA software releases should only be used on test units until the
software is released by us and approved through your organization's software
acceptance process.
The following procedure provides generic steps to directly download software from
the FTP server onto the DNCS. For security reasons, many sites do not allow open
Internet connections from the DNCS. As a result, your process might vary from the
procedure provided.
The software release note provides additional information necessary to download
software. If you have any questions about this process, contact Cisco Services.
information is located in the software release note.
Important: BETA software is provided to labs which, in turn, provide a broader
testing environment. BETA software releases are provided in their current state of
development and are not covered under the same software license agreements as
released software. BETA software releases should only be used on test units until the
software is released by us and approved through your organization's software
acceptance process.
The following procedure provides generic steps to directly download software from
the FTP server onto the DNCS. For security reasons, many sites do not allow open
Internet connections from the DNCS. As a result, your process might vary from the
procedure provided.
The software release note provides additional information necessary to download
software. If you have any questions about this process, contact Cisco Services.
Downloading the Client Application Software Release from the FTP Server
1 Log on to the DNCS as root.
2 Type the following command and press Enter.
1 Log on to the DNCS as root.
2 Type the following command and press Enter.
cd /export/home/dncs/download
3 Log on to our FTP server.
Note: The address of the server and login information are provided in the release
note for the software release.
note for the software release.