Cisco Cisco MXE 3500 (Media Experience Engine) Release Notes
6
Release Notes for Cisco MXE 3500 Release 3.3.2 on the Cisco MXE 3500 V3 Appliance
OL-27423-01
Caveats
CSCub91160
H.264 process stops at around 98% while the job status shows completed. For appliances running software
version 3.3.1, MP4 file transcoding jobs show completed while the H.264 process displays as 98% running.
This is the workaround:
version 3.3.1, MP4 file transcoding jobs show completed while the H.264 process displays as 98% running.
This is the workaround:
1.
In the Cisco MXE 3500 UI, navigate to Administration > System Settings.
2.
For the encoder you are using (for example, H.264) change the Output Directory setting.
Note
This change affects all H.264 encoders not just one profile. The following steps are required for all
H.264 profiles in use.
H.264 profiles in use.
3.
Navigate to New Profile > Distribution > Delivery.
a.
In the Common window, enable these check boxes:
–
Profile Enabled
–
Use selected profiles
b.
In the Delivery Formats window, enable the check box for the desired profile (for example, H.264)
and select the profiles to deliver. This will pair the delivery profile with a specific encoder.
and select the profiles to deliver. This will pair the delivery profile with a specific encoder.
c.
Save the profile.
4.
Open the Specific Job Profile and navigate to Distribution. In the Delivery window select the profile that
you saved in Step 3. Your job should look like the following screenshot. Save the profile. You should see
all output delivered to MXE-RM-IP\output.
you saved in Step 3. Your job should look like the following screenshot. Save the profile. You should see
all output delivered to MXE-RM-IP\output.
5.
Repeat these steps for all the job profiles that are in use.
Table 1
Open Caveats in Cisco MXE 3500 Release 3.3.2 (continued)
Identifier
Description