Cisco Cisco OptoStar II Driver Amplifier Installation Guide

Page of 75
Power Supply Structure, Continued
 
Panel Functions 
The following table lists the functions of the front panel indicators on the 
OptoStar II power supply module.   
Description 
Function 
Power LED 
Red/Green 
Indicator 
Blinks in red and green when the module is 
starting up. 
Green: With DC (direct current) output 
Red: Without DC (direct current) output 
OFF: The device is switched off 
Alarm LED 
Red/Green 
Indicator 
Green: module is in normal working condition 
Red: module is not working properly, and alarm 
occurs   
The following table lists other functions of the OptoStar II power supply module 
front panel.   
Description 
Function 
TP/24VDC 
Power supply output, 24V testing point, anode 
GND 
Power supply output, 24V testing point, earth terminal 
Cooling Vent 
Air intake, for heat radiation 
Power Switch 
Turn on or off the power   
Mounting Screws 
Mounts the module in the chassis 
The following table lists the functions of the OptoStar II power supply module 
rear panel.   
Description 
Function 
30-pin Connector 
Power and communication connecter of the module, 
and provides module ID information. 
IEC Outlet 
AC (alternative current) feed entry 
 
 
 
 
1-12 
Introduction 
OL-29659-03