Cisco Cisco OptoStar II Driver Amplifier Installation Guide
Functions, Continued
•
See operation procedures below:
1. To set host status: double click or right click the item to set, and the following
window will display:
You may set Host Name, Trap Receive, Email Alert, and Filter List in this
window. Enter multiple IP addresses in the Filter List, divided by Enter key.
window. Enter multiple IP addresses in the Filter List, divided by Enter key.
When the setup is completed, click the Save button to save the change.
2. To set alarm on/off: use the “
” button in the toolbar to
enable/disable all the server alarms.
3. To set alarm filter: use the “
” button in the toolbar to set filter IP
list of all the server alarms. When the setup is completed, the server will no
longer receive alarms from the filter IP list.
longer receive alarms from the filter IP list.
Continued on next page
3-18
Operation
OL-29665-03