Cisco Cisco Unified Operations Manager 8.0 White Paper
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved.
Page 58 of 112
It is recommended that these servers connect to the network through redundant paths.
This ensures that a failure in one part of the network that affects the Active server
does not also affect the connectivity of the Standby server.
The instructions given below apply to CUOM 1.1 with SP1 patch. Please contact your
TAC representative to obtain a copy of SP1 for CUOM 1.1
Follow this link to get to the SP1 patch:
http://wwwin-nm.cisco.com/Patches/patch-
publisher/listbyproduct.cfm?searchbug=CSCsc84584&searchcomponent=&searchfile
=&thisfamily=&thisproduct=2.+choose+product&searchProduct=UOM&searchheadl
ine=&searchowner=&fromForm=yes&submit=Submit
7.3.2 Setting up redundancy
Redundant deployment can be considered in four parts.
a) Setting up the Active OM server
b) Setting up the Standby OM server by creating a baseline.
c) Replicate Active OM configuration to Standby OM configuration on a ongoing
a) Setting up the Active OM server
b) Setting up the Standby OM server by creating a baseline.
c) Replicate Active OM configuration to Standby OM configuration on a ongoing
basis
d) Things to do in case of Failure of Active server.
7.3.3 Setting up the Active OM server
This is the same as setting up a standalone OM server. Typical tasks include:
- Setting up users and associating roles
- Providing a device list by manually adding devices or syncing up with LMS
Device Credential Repository or discovering the network using a seed device
- Setting up the polling intervals based on your monitoring requirements ( default is
4 minutes)
- Creating Phone Status Tests
- Creating Synthetic Tests
- Creating Node to Node tests
- Setting up SRST polling by creating SRST tests
- Enabling performance polling
- Setting up notification profiles for north bound notifications
- Configuring Service Monitor to forward traps to OM.
- Configuring Cisco 1040 Probes to register to the Service Monitor
- Creating Synthetic Tests
- Creating Node to Node tests
- Setting up SRST polling by creating SRST tests
- Enabling performance polling
- Setting up notification profiles for north bound notifications
- Configuring Service Monitor to forward traps to OM.
- Configuring Cisco 1040 Probes to register to the Service Monitor