Cisco Cisco Prime Collaboration Assurance 11.5 Technical Manual
Contents
Introduction
Prerequisites
Requirements
Components Used
Background Information
Configure
Build the destination cluster
Discover the cluster
Define the migration cluster
Initiate Migration
Verify
Troubleshoot
Related Cisco Support Community Discussions
Introduction
This document describes how to perform a migration between two Cisco Unified Communications
Manager (CUCM) cluster with Prime Collaboration Deployment (PCD).
Manager (CUCM) cluster with Prime Collaboration Deployment (PCD).
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on these software versions:
CUCM Release 10.0 and 10.5
●
PCD Release 10.5
●
The information in this document was created from the devices in a specific lab environment. All of
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
Background Information
Cisco PCD is a migration/upgrade application for Unified Communications applications. Using
PCD, you can upgrade the version of existing Unified Communications applications or you can
migrate the complete cluster to a new cluster of same or different version. This document
describes the migration procedures to CUCM 10.5 from version 10.0 where both the old and new
cluster were on Unified Computing System (UCS) platform.
PCD, you can upgrade the version of existing Unified Communications applications or you can
migrate the complete cluster to a new cluster of same or different version. This document
describes the migration procedures to CUCM 10.5 from version 10.0 where both the old and new
cluster were on Unified Computing System (UCS) platform.