Cisco Cisco Prime Collaboration 10.6 Installation Guide
3
Video SLA Assessment Agent 3.1 Installation Guide
Installing VSA Agent on the USB Drive
Make sure that the ICMP ping and traceroute commands are enabled between:
•
VSA Agent systems
•
VSA Agent systems and the Prime Collaboration Assurance server
Installing VSA Agent on the USB Drive
VSA Agent installation consists of two steps:
1.
2.
We recommend that you install and test VSA Agent in a lab environment before you test it in a
production environment.
production environment.
If you are installing VSA Agent 3.1 software on multiple USB drives, make sure that the same VSA
Agent version is installed on all systems.
Agent version is installed on all systems.
Before You Begin:
1.
Verify the following:
•
A minimum 16 GB USB drive is available for the installation.
Caution
Do not use a USB flash drive with more than 32 GB of memory.
•
USB 2.0 port is available for the installation.You cannot install VSA agent on a USB 3.0 port.
•
Administrator privilege is available on the system on which you plan to use the USB drive.
2.
From the Cisco Prime Collaboration
site, download the following images to the
Windows system on which you plan to install VSA Agent:
•
pc90-vsaa-creator-3.1.0.0-FC14.zip
•
pc90-Fedora-14-i686-Live-Desktop.iso
Note
You must have a valid Cisco.com user account to download the files.
8081
TCP
8090
TCP
16384-16788
UDP
Table 2
Port Requirements (continued)
Port Number
Protocol