Cisco Prisma EtherLinX 4 Module Data Sheet
Page 4 of 6
Table 2. Technical Specifications
Technical Specifications
Value
Standards Compliance & Feature Highlights
IEEE 802.3 Ethernet 10Base-T
IEEE 802.3u 100Base-TX and 100Base-FX
IEEE 802.1Q and 802.1p VLAN (full-range 1 to 4,094)
Accepts VLAN traffic on Uplink port (if VLAN is enabled)
Define 1 VLAN for each Downlink port and 1 for SNMP
QoS
– 802.1p-based packets prioritization
(2 queues [high/low] with 8 levels of prioritization)
Define 802.1p priority for each port
Layer 2 packet switching, store and forward operation
1024 MAC addresses
Supports IGMP multicast pruning/snooping (v1/v2)
Supports configuration via Telnet
Supports serial configuration
Remote firmware upgrades
Supports over-sized packets up to 1536 bytes
Automatic MDI/MDI-X for plug-and-play operation
Up to full wire speed on all ports (except downlink, which also
functions as a serial port)
functions as a serial port)
Network Interfaces
Four (AE/4) 10/100 Mb/s Ethernet downlink ports
(For serial configuration, use supplied RJ-45 to DB9 adapter on
specified downlink port)
specified downlink port)
One 100 Mb/s fiber or 10/100 copper Uplink
1300 nm multi-mode, 1310 nm or 1550 nm single-mode fiber, or
single-strand fiber
single-strand fiber
Dimensions (W x D x H)
4.75 in. x 7.25 in. x 1.5 in.
(12.07 cm x 18.42 cm x 3.81 cm)
(12.07 cm x 18.42 cm x 3.81 cm)
Shipping Weight
1.6 lbs. (0.7 kg)
Environmental
Operating Temperature: 32 to 122°F (0 to 50°C)
Storage Temperature: 22 to 160°F (-6 to 71°C)
Humidity: 5 - 95% (non-condensing)
Storage Temperature: 22 to 160°F (-6 to 71°C)
Humidity: 5 - 95% (non-condensing)
Regulatory Approvals
FCC Class B, UL, CSA, CE