Cisco Prisma DS3 E3 STS-1 Converter with Remote Management Installation Guide
November 2004
Prisma
®
FiberLinX
™
Gigabit Media Converter Module Installation
Instructions
Overview
Purpose
These installation instructions provide product information and instructions for
installing the Prisma
installing the Prisma
®
FiberLinX
™
Gigabit Media Converter module.
Introduction
The Prisma FiberLinX Gigabit module solution connects two remote networks over
fiber optics and allows administrators to observe both the end-points and the fiber
link between them as a single management entity and not as separate networks. No
host management traffic is visible to the remote or customer network nor is access to
the customer network required, guaranteeing end-to-end data integrity.
fiber optics and allows administrators to observe both the end-points and the fiber
link between them as a single management entity and not as separate networks. No
host management traffic is visible to the remote or customer network nor is access to
the customer network required, guaranteeing end-to-end data integrity.
Qualified Personnel
Only appropriately qualified and trained personnel should install, operate, maintain,
and service this product.
and service this product.
WARNING:
Allow only qualified personnel to install, operate, maintain, and service this
product. Otherwise, personal injury or equipment damage may occur.
product. Otherwise, personal injury or equipment damage may occur.
Continued on next page